ray diffraction pattern meaning in Chinese
射线衍射图形
Examples
- X - ray diffraction patterns x
光绕射图案 - The spinel limn2o4 is synthesized by the citrous acid method . the x - ray diffraction pattern of limn2o4 show that the product is a spinel phase with a = 0 . 824nm cubic unit cell
论文首先采用柠檬酸配位法制备尖晶石型limn2o4 ， x射线衍射( xrd )证实了产物的结构，晶胞参数a = 0 . 824nm 。 - The x - ray diffraction patterns and raman spectra indicated that zns fully transformed into zno with a polycrystalline hexagonal wurtzite structure when zns thin films were oxidized at annealing temperature of above 700 oc in an oxygen ambient
X射线衍射（ xrd ）和拉曼实验结果表明硫化锌（ zns ）薄膜在高于700oc热氧化处理后，硫化锌（ zns ）全部转化为氧化锌（ zno ） ，且是六角纤锌矿的多晶薄膜。 - As shown by uv - vis spectra , the contents of these europium - containing polyoxometalates in the composite films increase with the exchange time and become saturated after a number of days . x - ray diffraction patterns indicate the regular multibilayer structures of these composite films
用紫外-可见光谱仪监测离子交换过程，发现随着交换时间的增加交换速率逐渐变慢，最终多阴离子把前驱体膜中的氯离子完全交换掉。 - By analyzing the microstructure of as - cast alloys with different surplus of samarium added , the optimum surplus of samarium is decided . by comparing the microstructure of the alloys annealed for different time , the ideal and economical annealing time is confirmed . the microstructure and phase composition of alloys during the whole preparation of sm2fe17nx are analyzed using the scanning electron micrograph with energy - dispersive x - ray analysis and x - ray diffraction patterns
本论文首先就熔炼工艺参数对铸态组织微结构的影响进行了探讨，并制定出一套较为合适的熔炼工艺；通过对不同钐加入量的铸态组织微观结构的观察分析，确定了原料配置过程中钐的最佳补偿量；通过对采用不同退火时间的合金组织进行比较，确定了理想、经济的退火时间；同时还利用扫描电子显微图像和x射线衍射图谱，比较了整个制备过程中，试样微结构和相组成的变化情况。